常见问题

热水器的问题 & 答案

点击下面阅读常见问题的答案 
商业和彩乐园APP平台热水器.

彩乐园APP平台热水器问题

彩乐园APP平台燃气热水器问题

如果你的热水器使用年限少于8年, 并且没有泄漏, 一个合格的技术员在热水器人, 公司. 可以修复它.  然而, 热水器漏水, 或者超过8年, 这个装置应该被更换,因为修理它可能比买一个新的电器花费更多.

平均, the life expectancy of a residential water heater is about 8-10 years, 视以下情况而定:

  1. 是否安装了软水器? If the answer is yes, the life expectancy of the water heater can be reduced. 软水器过滤掉硬水中的钙和镁,这样这些矿物质就不会进入热水器. 然而, the salt used in the water softener causes the heater’s anode rod to deteriorate rapidly, placing the appliance at risk for corrosion after one to two years.
  2. 多余的热膨胀 物理学定律规定,水加热时会膨胀. A typical st和ard water heater tank can h和le a modest amount of thermal expansion. 当没有打开水龙头来释放水加热引起的压力时,就会出现问题. 结果,T&P (temperature 和 pressure relief valve) will start to drip to release the excess pressure. Thermal Expansion can be evident immediately upon a new installation or years in the future. 如果存在热膨胀, a properly sized expansion tank can be installed to cure this problem.

Anode Rods protect residential water heater tanks from corrosion. A typical water heater contains one or two factory-installed Anode rods, 根据保修期的类型而定. 阳极棒由铝或镁制成, 什么会对水中的物质产生反应, causing an electrochemical reaction that draws corrosion to itself, 而不是热水器水箱的玻璃衬里.

Sediment builds up in a water heater based on the hardness of your water. 当排水阀开启进行冲洗时, 加热器不能排出大颗粒或沉积岩,因为阀门的开度不够大,不能让它们通过. 这就是为什么我们不建议排水您的加热器.  If you want your heater drained, please call our office 和 schedule an appointment. 一旦你打开排水阀, 沉淀物颗粒会进入橡胶密封圈,使排水阀不能正常关闭,从而导致阀门泄漏. 

当天气变冷时,水变得更冷,因为空气和地下的温度更低. 当你使用大量的热水时, 加热进入水箱的冷水需要更长的时间,因为由于天气变冷,水管已经在夜间冷却了. 当你的热水器在早晨淋浴时, 例如, 更多的冷水进入,使一切冷却下来. 给我们打个电话,了解节约用水和立即获得热水的不同选择.

Conventional – peace of mind, minimal maintenance, lower purchase cost.

无坦克-更高的购买成本, 需要维护, 必须有过滤器或软水器吗, 气体和通风管道可能需要升级. 

请打电话给我们,以便更深入地讨论这个问题.

在一些司法管辖区,法规要求有泄水盘.  建议安装泄水盘, 因为这将有助于保护周围地区免受水的损害,如果热水器是一个缓慢的泄漏和排水管锅有一个排水管管道或室外的房子. 

维修平均需要一小时到一个半小时.  热水器的位置, 访问, 和 difficulty of complaint will also contribute to the length of a service call.

现在不是时候.  我们唯一做的管道工程是附属于热水器的.

大多数彩乐园APP平台热水器的水箱泄漏长达6年, 6年部分, 一年的生产缺陷保修.  10年保修也可以在安装时购买. 

维修——有了型号和序列号,我们就可以确保卡车上有正确的部件,这样我们就可以在第一次出行时提供服务. 

热水器-我们希望确保您更换的热水器在尺寸和回收率上与您现有的热水器兼容.  有一个型号和序列号可以确保这一点,并允许我们确定是否有任何保修留下您的热水器. 

The model 和 serial number are located on a sticker on the front of the water heater.  这个标签叫做评级板.  It also has all the other pertinent information for your water heater. 

新的热水器在热水器底部有进气屏,必须是干净的,没有碎片,以便正常操作.  如果该区域很脏,这可能会导致飞行员停飞.   在为热水器提供服务时,服务技术人员需要有足够的空间对设备进行操作.

我们尽量携带热水器最常见的部件,这就是为什么我们要求型号和序列号. 

目前,我们有布拉德福德怀特热水器.  虽然这是我们的存货, we have 访问 to any br和 water heater should you request a different br和. 

Normally there is a isolation valve on the cold water supply to the water heater.  This valve is located on the above the water heater on the right h和 side water line.  这个阀门可以是一个球阀(有一个手柄),必须旋转90度,或者一个闸阀(有一个旋钮),必须顺时针旋转.  If you are unsure 和 this is an emergency situation, you should call the fire department. 

煤气管道连接热水器, there should be an isolation valve that has a knob that has to be turned.  This is usually a ball valve with a h和le that has to be turned 90 degrees.  也有一些需要180度转弯.   If you are unsure 和 this is an emergency situation, you should call the fire department. 

防止水浸和漏水, 你能做的最好的事情就是每年让有资格的技术人员出来检查的公司来维修它. 通常, 他们可以引用泄露开始的信号, 不当的燃烧, 一氧化碳问题和气体泄漏. Those are all things they would check for with an annual inspection.

商用热水器问题

商用热水器问题

The loud rumbling 和 popping noise can be caused by the following:

Low Water Pressure: Normally, water pressure should be around 65-75 PSI. If your water pressure is low (35-50 PSI), you may hear a rumbling noise. Contact your water department to clarify what your water pressure should be for optimal use.

Sediment Build Up: Sediment is caused by a mineral caused calcium carbonate.

When calcium in the water is heated, the deposits fall into the bottom of the tank. 当水位于沉积物和水箱之间并变成蒸汽气泡时,就会产生隆隆声. 沉淀物在主燃烧器和水之间形成一个屏障,导致更多的气体消耗(能量)来加热水到所需的温度. 这也会使金属罐过热, 随着时间的推移,, 会削弱钢罐和损坏玻璃衬里, 导致热水器过早失效. The hotter the desired water temperature, the more calcium deposits fall into the tank.

根据您所安装的热水器型号,有多种方法来重置/重新点亮您的热水器.

电子点火热水器-这种类型的热水器需要120伏特的电源. 重置机组, 只要拔掉或切断热水器的电源, wait about 10 seconds 和 reconnect the power supply to the water heater. 大约15秒后,你会听到滴答声. You can then look underneath the water heater to see if the main burner is on. 如果什么都没有发生, plug some other type of equipment into the outlet to see if there is power at the outlet. 如果没有电力, 试着把一根延长线钩到热水器的一个有电源的插座上,看看热水器是否工作. 要求服务.

立式先导式热水器-按照热水器前面的说明重新点亮热水器. 如果还是不行,请拨打热水器服务电话.

循环泵的作用是在5秒内将热水输送到所有由热水供应的水龙头. 再循环泵连接到次要供应管线上,次要供应管线连接到离热水器最远的固定装置处的热水供应管线上. 然后再循环泵将热水循环到整个建筑中,所以在水龙头打开后的5秒内,每个装置都有热水. 一个再循环泵和再循环线可以节省你的能源和水费,因为管道是持续的(当需要时,泵也可以定时)热的,你有温暖的水返回热水器. 没有再循环管路, 平均, 最远的淋浴/浴缸可以浪费估计12,每年要消耗1000加仑的水,等待水变热.  If you don’t have a dedicated recirc line, a dedicated line can be added, but is costly.  他们现在制造的系统可以让你在几秒钟内就能得到热水,而不需要运行一个专用的循环管道.  These are called Comfort Systems 和 can be purchased 和 installed through us.

All commercial grade water heaters have a manufacturer’s three year limited warranty. The warranty covers three years for tank leakage 和 one year for parts 和 labor. All water heater manufacturers have an optional five year warranty at an additional cost.

k8彩乐园返点官网下载下载. offers a Preventative Maintenance Program for all water heaters 和 boilers. 详情请致电.

您的热水器是否关闭,并在您的Bradford White UCG100H399上显示错误码110或61? 在使用高峰期,你有没有漏热水?

问题可能出在你的气压上.

Gas pressure will fluctuate when all equipment is on in the building. 如果供气管线很小, the water heater may be having issues with the dynamic gas pressures.

  • On this particular water heater, the static gas pressure is rated between a minimum 4.5″wc和最大14″wc.
  • 动态气体压力不应低于1.5 " wc的静态气体压力
  • 当所有设备都在使用时,在使用高峰期通常会看到气体压力下降
  • If the Dynamic pressure drops below 5”wc the water heater will not operate properly

当测试静态气体压力时,你必须确保所有的设备都处于开启和运行状态. 如果你不这样做,你的读数就不准确

Hook up manometer to inlet port on gas valve 和 get static gas pressure reading

打开加热器,等待加热器着火. After 3- 5 minutes while heater is at full fire, check you dynamic pressure. 如果压力降到1以下.5”wc, there is a problem with either the gas supply or size of the gas line.

仔细检查煤气管道的尺寸.

如果安装了燃气弯管,请再次检查其额定值.

Verify the main gas line prior to the tee off for the water heater is sized adequately.

公司rease the gas line to the water to a minimum 1 ¼” as close to the heater as possible.

重新测试静态和动态气体压力.

If the problem persists there many be a different issue causing your loss of hot water.

在某些情况下你可以, but the job site would have to be properly sized with a water heater sizing guide. 大多数应用程序的大小,以适应在一天的高峰时期的热水使用. 我们不建议缩小您的热水器,除非遵循所有的措施和应用程序的大小是适当的. 请致电进一步协助.

安排你的热水器服务

使用下面的表格或打电话给我们(800)372-1800.

服务包括:



    该站点受reCAPTCHA和谷歌保护 隐私政策服务条款 应用.

    5/5

    “我对迈克和埃里克的工作很满意. 后来, 我看到迈克在帮助一位患有老年痴呆症的邻居,他在街上游荡,不知道他住在哪里. 迈克给了那个男人零食,并叫警察来帮助他. 迈克做了超出职责范围的事. 荣誉对他.”

    艾伦B.

    5/5

    “我对提供的服务非常满意,感谢您花时间解释如何关闭总水阀. You didn’t have to take the time to show me how, but I’m so very happy that you did.”

    丹尼尔·威廉姆斯